Travato Cowl Drip Tray

This is a tray to catch and divert the water that leaks into the engine compartment thru the seam in the windshield cowling. These are printed to order, using PETG. Bolts to the metal flange as shown in the pictures. The hardware and tubing are an optional add-on.

To install: insert bolts in metal flange from behind and secure with jam nuts. add the tray and secure with the locking nuts.

If you order this without the optional hardware, you will need these:
2 6mm bolts 25mm long
2 6mm nuts
2 6mm locking nuts
3 feet of 1/2" ID tubing
zip ties to hold tubing

(Version 2 has been discontinued and is no longer available)